LOADING
LOADING
HARD WATER GUIDE · GUJARAT
515 ppm avg TDS · Extreme Hardness
Marks form within days. Fighter is the only consumer-grade product tested at this TDS level.
AVG TDS
515 ppm
RANGE
423-607 ppm
SEVERITY
Extreme
STATE
Gujarat
PINCODE
365430
Lathi water, like most of Gujarat, is sourced from borewells and groundwater aquifers. As water travels through rock and soil, it dissolves calcium and magnesium carbonates — the minerals responsible for hard water. The result: 515 ppm TDS, classified as Extreme hardness.
At Extreme TDS, untreated glass develops permanent etching within months. The mineral layer bonds so strongly that physical scrubbing spreads it rather than removing it.
BIS standard IS:10500 considers water above 300 ppm as hard and recommends treatment above 500 ppm. At 515 ppm, Lathi water exceeds this threshold — residents experience visible scale buildup on bathroom surfaces within days of cleaning.
White haze on shower glass
Calcium and magnesium deposits bond chemically to glass. They cannot be scrubbed off — only dissolved.
Crust around faucets & taps
Calcium carbonate builds up around tap bases, aerators, and showerhead holes, reducing water flow.
Cloudy tiles and grout
Grout lines and tile surfaces accumulate scale that standard bathroom cleaners can't remove.
Soap scum and poor lather
Hard water reacts with soap to form insoluble scum instead of foam, leaving skin and surfaces feeling filmy.
Geyser and appliance damage
At 515 ppm, scale builds inside geysers within months, cutting heating efficiency and lifespan.
Spots on glasses and vessels
Washed glassware develops white water spots as TDS minerals are left behind on drying.
Most bathroom cleaners — including popular brands — are alkaline (pH 8–12). Calcium carbonate, the primary mineral in hard water scale, is also alkaline. Like dissolves like — and opposite chemistry dissolves. To break calcium bonds, you need acid.
At Lathi's 515 ppm, home remedies like diluted vinegar (pH ~3) have some effect on light deposits but cannot penetrate the dense mineral layer formed at this hardness level. A purpose-built multi-acid formula at pH 3.4 with cling-gel delivery is required.
01
SPRAY
Coat the stained surface with Fighter's cling-gel formula. It stays on vertical glass without running.
02
WAIT 60s
The triple-acid system (pH 3.4) penetrates and dissolves calcium carbonate, magnesium, and iron staining.
03
WIPE
Wipe or rinse off. No scrubbing. No second pass. Crystal-clear glass in one application.
What is the TDS of water in Lathi?
Water in Lathi, Gujarat averages approximately 515 ppm TDS — classified as Extreme hardness. The typical range for this area is 423-607 ppm.
Is Lathi water hard?
Yes. At 515 ppm, Lathi water is classified as Extreme hardness by BIS standard IS:10500. This exceeds the 500 ppm threshold beyond which water treatment is recommended.
Does vinegar work on hard water stains in Lathi?
Vinegar works on light scale below 300 ppm. At Lathi's 515 ppm TDS, the mineral layer is too dense. A purpose-built acid cleaner like OrangeDemon Fighter performs significantly better at this hardness level.
Is Lathi water safe to drink?
BIS IS:10500 recommends TDS below 500 ppm for drinking water. Lathi averages 515 ppm — above this threshold. An RO water purifier is strongly recommended.
BUILT FOR LATHI WATER CONDITIONS
India's first acid-based shower glass cleaner. Tested in 450+ TDS conditions. Dissolves calcium, magnesium, and iron staining in 60 seconds — no scrubbing required.