LOADING
LOADING
HARD WATER GUIDE · GUJARAT
554 ppm avg TDS · High Hardness
Standard cleaners won't fully cut through this. Fighter's acid-gel was built for your conditions.
AVG TDS
554 ppm
RANGE
455-653 ppm
SEVERITY
High
STATE
Gujarat
PINCODE
382845
Mansa water, like most of Gujarat, is sourced from borewells and groundwater aquifers. As water travels through rock and soil, it dissolves calcium and magnesium carbonates — the minerals responsible for hard water. The result: 554 ppm TDS, classified as High hardness.
High TDS means scale bonds chemically to glass within days. Regular cleaning products fail because they cannot break calcium-carbonate bonds — only acid chemistry can.
BIS standard IS:10500 considers water above 300 ppm as hard and recommends treatment above 500 ppm. At 554 ppm, Mansa water exceeds this threshold — residents experience visible scale buildup on bathroom surfaces within days of cleaning.
White haze on shower glass
Calcium and magnesium deposits bond chemically to glass. They cannot be scrubbed off — only dissolved.
Crust around faucets & taps
Calcium carbonate builds up around tap bases, aerators, and showerhead holes, reducing water flow.
Cloudy tiles and grout
Grout lines and tile surfaces accumulate scale that standard bathroom cleaners can't remove.
Soap scum and poor lather
Hard water reacts with soap to form insoluble scum instead of foam, leaving skin and surfaces feeling filmy.
Geyser and appliance damage
At 554 ppm, scale builds inside geysers within months, cutting heating efficiency and lifespan.
Spots on glasses and vessels
Washed glassware develops white water spots as TDS minerals are left behind on drying.
Most bathroom cleaners — including popular brands — are alkaline (pH 8–12). Calcium carbonate, the primary mineral in hard water scale, is also alkaline. Like dissolves like — and opposite chemistry dissolves. To break calcium bonds, you need acid.
At Mansa's 554 ppm, home remedies like diluted vinegar (pH ~3) have some effect on light deposits but cannot penetrate the dense mineral layer formed at this hardness level. A purpose-built multi-acid formula at pH 3.4 with cling-gel delivery is required.
01
SPRAY
Coat the stained surface with Fighter's cling-gel formula. It stays on vertical glass without running.
02
WAIT 60s
The triple-acid system (pH 3.4) penetrates and dissolves calcium carbonate, magnesium, and iron staining.
03
WIPE
Wipe or rinse off. No scrubbing. No second pass. Crystal-clear glass in one application.
What is the TDS of water in Mansa?
Water in Mansa, Gujarat averages approximately 554 ppm TDS — classified as High hardness. The typical range for this area is 455-653 ppm.
Is Mansa water hard?
Yes. At 554 ppm, Mansa water is classified as High hardness by BIS standard IS:10500. This exceeds the 500 ppm threshold beyond which water treatment is recommended.
Does vinegar work on hard water stains in Mansa?
Vinegar works on light scale below 300 ppm. At Mansa's 554 ppm TDS, the mineral layer is too dense. A purpose-built acid cleaner like OrangeDemon Fighter performs significantly better at this hardness level.
Is Mansa water safe to drink?
BIS IS:10500 recommends TDS below 500 ppm for drinking water. Mansa averages 554 ppm — above this threshold. An RO water purifier is strongly recommended.
BUILT FOR MANSA WATER CONDITIONS
India's first acid-based shower glass cleaner. Tested in 450+ TDS conditions. Dissolves calcium, magnesium, and iron staining in 60 seconds — no scrubbing required.