LOADING
LOADING
HARD WATER GUIDE · UTTAR PRADESH
382 ppm avg TDS · High Hardness
Standard cleaners won't fully cut through this. Fighter's acid-gel was built for your conditions.
AVG TDS
382 ppm
RANGE
314-450 ppm
SEVERITY
High
STATE
Uttar Pradesh
PINCODE
212410
Phulpur PYG water, like most of Uttar Pradesh, is sourced from borewells and groundwater aquifers. As water travels through rock and soil, it dissolves calcium and magnesium carbonates — the minerals responsible for hard water. The result: 382 ppm TDS, classified as High hardness.
High TDS means scale bonds chemically to glass within days. Regular cleaning products fail because they cannot break calcium-carbonate bonds — only acid chemistry can.
BIS standard IS:10500 considers water above 300 ppm as hard and recommends treatment above 500 ppm. At 382 ppm, Phulpur PYG water is within the acceptable range, but mineral deposits on shower glass and faucets are still a common household issue.
White haze on shower glass
Calcium and magnesium deposits bond chemically to glass. They cannot be scrubbed off — only dissolved.
Crust around faucets & taps
Calcium carbonate builds up around tap bases, aerators, and showerhead holes, reducing water flow.
Cloudy tiles and grout
Grout lines and tile surfaces accumulate scale that standard bathroom cleaners can't remove.
Soap scum and poor lather
Hard water reacts with soap to form insoluble scum instead of foam, leaving skin and surfaces feeling filmy.
Geyser and appliance damage
At 382 ppm, scale builds inside geysers within months, cutting heating efficiency and lifespan.
Spots on glasses and vessels
Washed glassware develops white water spots as TDS minerals are left behind on drying.
Most bathroom cleaners — including popular brands — are alkaline (pH 8–12). Calcium carbonate, the primary mineral in hard water scale, is also alkaline. Like dissolves like — and opposite chemistry dissolves. To break calcium bonds, you need acid.
At Phulpur PYG's 382 ppm, home remedies like diluted vinegar (pH ~3) have some effect on light deposits but cannot penetrate the dense mineral layer formed at this hardness level. A purpose-built multi-acid formula at pH 3.4 with cling-gel delivery is required.
01
SPRAY
Coat the stained surface with Fighter's cling-gel formula. It stays on vertical glass without running.
02
WAIT 60s
The triple-acid system (pH 3.4) penetrates and dissolves calcium carbonate, magnesium, and iron staining.
03
WIPE
Wipe or rinse off. No scrubbing. No second pass. Crystal-clear glass in one application.
What is the TDS of water in Phulpur PYG?
Water in Phulpur PYG, Uttar Pradesh averages approximately 382 ppm TDS — classified as High hardness. The typical range for this area is 314-450 ppm.
Is Phulpur PYG water hard?
Yes. At 382 ppm, Phulpur PYG water is classified as High hardness by BIS standard IS:10500. Mineral effects are visible on bathroom surfaces, though drinking water remains within acceptable limits.
Does vinegar work on hard water stains in Phulpur PYG?
Vinegar works on light scale below 300 ppm. At Phulpur PYG's 382 ppm TDS, the mineral layer is too dense. A purpose-built acid cleaner like OrangeDemon Fighter performs significantly better at this hardness level.
Is Phulpur PYG water safe to drink?
BIS IS:10500 recommends TDS below 500 ppm for drinking water. Phulpur PYG averages 382 ppm — within acceptable limits, though an RO purifier adds an extra safety margin.
BUILT FOR PHULPUR PYG WATER CONDITIONS
India's first acid-based shower glass cleaner. Tested in 450+ TDS conditions. Dissolves calcium, magnesium, and iron staining in 60 seconds — no scrubbing required.