LOADING
LOADING
HARD WATER GUIDE · MANIPUR
226 ppm avg TDS · Moderate Hardness
Marks build over weeks. Fighter dissolves them and slows their return 3–4× longer.
AVG TDS
226 ppm
RANGE
176-276 ppm
SEVERITY
Moderate
STATE
Manipur
PINCODE
795008
Singjamei water, like most of Manipur, is sourced from borewells and groundwater aquifers. As water travels through rock and soil, it dissolves calcium and magnesium carbonates — the minerals responsible for hard water. The result: 226 ppm TDS, classified as Moderate hardness.
At this TDS level, white residue forms on shower glass within 2–3 weeks of cleaning. Standard alkaline cleaners provide partial results but leave a haze.
BIS standard IS:10500 considers water above 300 ppm as hard and recommends treatment above 500 ppm. At 226 ppm, Singjamei water is within the acceptable range, but mineral deposits on shower glass and faucets are still a common household issue.
White haze on shower glass
Calcium and magnesium deposits bond chemically to glass. They cannot be scrubbed off — only dissolved.
Crust around faucets & taps
Calcium carbonate builds up around tap bases, aerators, and showerhead holes, reducing water flow.
Cloudy tiles and grout
Grout lines and tile surfaces accumulate scale that standard bathroom cleaners can't remove.
Soap scum and poor lather
Hard water reacts with soap to form insoluble scum instead of foam, leaving skin and surfaces feeling filmy.
Geyser and appliance damage
At 226 ppm, scale builds inside geysers within months, cutting heating efficiency and lifespan.
Spots on glasses and vessels
Washed glassware develops white water spots as TDS minerals are left behind on drying.
Most bathroom cleaners — including popular brands — are alkaline (pH 8–12). Calcium carbonate, the primary mineral in hard water scale, is also alkaline. Like dissolves like — and opposite chemistry dissolves. To break calcium bonds, you need acid.
At Singjamei's 226 ppm, home remedies like diluted vinegar (pH ~3) have some effect on light deposits but cannot penetrate the dense mineral layer formed at this hardness level. A purpose-built multi-acid formula at pH 3.4 with cling-gel delivery is required.
01
SPRAY
Coat the stained surface with Fighter's cling-gel formula. It stays on vertical glass without running.
02
WAIT 60s
The triple-acid system (pH 3.4) penetrates and dissolves calcium carbonate, magnesium, and iron staining.
03
WIPE
Wipe or rinse off. No scrubbing. No second pass. Crystal-clear glass in one application.
What is the TDS of water in Singjamei?
Water in Singjamei, Manipur averages approximately 226 ppm TDS — classified as Moderate hardness. The typical range for this area is 176-276 ppm.
Is Singjamei water hard?
Yes. At 226 ppm, Singjamei water is classified as Moderate hardness by BIS standard IS:10500. Mineral effects are visible on bathroom surfaces, though drinking water remains within acceptable limits.
Does vinegar work on hard water stains in Singjamei?
Vinegar works on light scale below 300 ppm. At Singjamei's 226 ppm TDS, the mineral layer is too dense. A purpose-built acid cleaner like OrangeDemon Fighter performs significantly better at this hardness level.
Is Singjamei water safe to drink?
BIS IS:10500 recommends TDS below 500 ppm for drinking water. Singjamei averages 226 ppm — within acceptable limits, though an RO purifier adds an extra safety margin.
BUILT FOR SINGJAMEI WATER CONDITIONS
India's first acid-based shower glass cleaner. Tested in 450+ TDS conditions. Dissolves calcium, magnesium, and iron staining in 60 seconds — no scrubbing required.